Hydratec Inc.

All Cards

Page:

* On smaller devices swipe left to view hidden table data

Ribbon/Toolbar (Software) Button Function Error Type Description
Ribbon/Toolbar (Software) Button Function Error Type Description
View (card-1288) HydraCAD (Revit Based) RTS Points Write RTS Point List To File None

Error when picking Write RTS Point List To File

View (card-1287) Sprinklers (AutoCAD Based) Insert Sprinkler Head Block Definition Sprinkler Not Properly Configured

When inserting a SIDEWALL sprinkler, HydraCAD does not ask for the rotation angle of the sprinkler head, it inserts it at 0°

 

 

Ideally, it should ask for the rotation angle of the sprinkler head;

 

 

 

View (card-1286) HydraCALC (Revit Based) Define Supply None Command Failure For External Command

Command Failure for External Command... The Parameter is Read-Only

View (card-1285) Plot (AutoCAD Based) Plot None Missing Pipe

When using 'Publish selected layouts' or doing a batch plot in AutoCAD 2024, the riser nipple/vertial pipe does not display correctly.  It'll either be missing outright or a proxy bounding box will be in its place.  If you plot a single sheet, it works fine.

 

AutoCAD 2024 batch plot

'

 

AutoCAD 2024 single plot

 

 

View (card-1283) Piping (AutoCAD Based) Size Pipe Setup None None

A second copy of pipe sizes (pipex) appears on the drawing when using NWCOUT

 

View (card-1282) Build 3D Risers (AutoCAD Based) Insert Fitting Via HydraList None Unhandled Exception

blue beam loaded on machine (a pdf writer) 3dfittings unhandled exceptio

View (card-1281) 3D Modeling (AutoCAD Based) Show System Model None None

Sprinkler heads not defined in the drawing or no 3D block assigned for a sprinkler head. Going to Navis only - corrupt Persistent Model drawing? eKeyNotFound Dialog box HydraCAD

View (card-1280) Opening a Drawing (AutoCAD Based) None None Security Error

NOTE - If you are getting this message when opening AutoCAD/HydraCAD by using your desktop icon, see HydraCARD #260.  

 

 

 

When opening, closing, or saving a specific drawing, you only receive this error message and not a HydraKEY security error with the golden X. 

 

After AutoCAD opens, press F2 to view the command prompt, see if the text below appears.  This may or may not be related, IDK.

Is 2024; error: no function definition: PRINTEM

 

You will likely this message as well;

All of the possible directories for storing temporary files either do not exist or are readonly.  Please correct this situation before running AutoCAD again.

 

 

View (card-1279) Launching HydraCAD (AutoCAD Based) Opening None None

No message. Double-clicking a DWG file to launch AutoCAD opens drawing but also starts a new drawing or brings up the Start Menu.

View (card-1278) Listing (AutoCAD Based) Start Autolist None Missing Pipe Dimension

After Autolist has run, your drawing doesn't display any cut pipe dimensions.  Only cut vertical pipes/riser nipples are visible, but not the megenta PIPEX block

 

View (card-1277) HydraLIST (Standalone) Process Total Weight None

After processing a stock list, the Total weight value displays as -999.0000

View (card-1276) Entitlement (Security and Licensing) None None Fingerprint

When attempting to activate an Entitlement you get the error;

System,Net.WebException: The remote server returned an error: (400)
Bad Request.
at System.Net.HttpWebRequest.GetResponse()
at HCADLicense,Form1.Iogin(String product_key)
at HCADLicense.Form1.btnAuthorize_Click(Object sender, EventArgs e)

 

View (card-1275) HydraKEY (Security and Licensing) Log Out (Subscription) None None

Unable to contact our servers to Log you out. Your subscriptions are still intact on this machine. It is neccessary to contact the server to release your subscriptions for use elsewhere.

View (card-1274) Installation (AutoCAD Based) Hydra_DAO_Install.EXE None Error 1935

When trying to install the Hydra_DAO_Install.exe based on this HydraCARD;

https://hydracards.hydratecinc.com/cards/card-864

You get this error;

Microsoft Visual C++ 2008 Redistributable Setup
Error 1935 An error occurred during the installation of assembly VC90.MFCLOC

0x80070005

 

Followed by this one;

An error occurred during setup

Installation failed.

View (card-1273) Launching HydraCAD (AutoCAD Based) Opening None None

When opening HydraCAD, you get this error message or something similar

AutoCAD Warning

The following shortcuts in the search were invalid and ignored: \Users\AppData\Local\Microsoft\Windows\WinX\Group...

After clicking OK, HydraCAD will open up, albeit very slowly, and almost every step will take an significant amount of time, for example 45 seconds to start a new drawing or to size a pipe

 

View (card-1272) 3D Modeling (AutoCAD Based) Show Model Errors None Crash

When raising to 3D, AutoCAD crashes with no error, no warning, it just closes.

You can test this by closing all open drawings then starting a new drawing using the Hydratec template, "Hydracad Imperial Default".

Draw one pipe 10' long (LN command). 

Place a length & 2" diameter on it (SZP command)

Place a 10' AFF elevation mark on it (AFF command)

Start the process of raising to 3D (S3D command).  It will then crash out without warning around step 2 (something about sprinkler heads).

View (card-1271) View (Revit Based) None None None

This is NOT for a HYDRACARD.  It is a request for additional tags for a Helpful Video

View (card-1270) View (Revit Based) 3D View None None

This is NOT an error card.  It is a request for a helpful video!

View (card-1269) HydraCAD (Revit Based) Spacing and Layout Insert Sprinklers None

No Error given but Pipes look like theyy are missing after program completion.

View (card-1268) HydraCAD (Revit Based) Configure Head Connect Head None

No Error given but Pipes look like theyy are missing after program completion.

Page: